Enterasys D-Series User Manual

set ssh hostkey
Enterasys D-Series CLI Reference 17-75
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableSSH:
D2(su)->set ssh disable
set ssh hostkey
UsethiscommandtosetorreinitializenewSSHauthenticationkeys.
Syntax
set ssh hostkey [reinitialize]
Parameters
Defaults
Ifreinitializeisnotspecified,theusermustsupplySSHauthenticationkeyvalues.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoregenerateSSHkeys:
D2(su)->set ssh hostkey reinitialize
enable|disable EnablesordisablesSSH,orreinitializestheSSHserver.
reinitialize ReinitializestheSSHserver.
reinitialize (Optional)Reinitializestheserverhostauthenticationkeys.

Enterasys D-Series Specifications

General

Brand	Enterasys
Model	D-Series
Category	Switch
Language	English