Enterasys D-Series

clear port lacp
Enterasys D-Series CLI Reference 6-49
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
IfyousetaporttoLACPpassiveusingthecommandclearportlacpport<port‐string>
aadminstatelacpactive,thecommandclearportlacpport<port‐string>aadminstatelacptimeout
willalsobeaddedtotheconfiguration.Ifyouunsetthefirstcommand,itwillremovethesecond
command
automaticallyfromtheconfigurationfile.
Example
Thisexampleshowshowtoclearalllinkaggregationparametersforportge.3.16:
D2(su)->clear port lacp port ge.3.16
padminport DeletesapartnerportfromtheLACPconfiguration.
padminstate
lacpactive|
lacptimeout|
lacpagg|lacpsync
|lacpcollect|
lacpdist|lacpdef|
lacpexpire|all
Clearstheport’sspecificpartneradminstate,orallpartneradminstate(s).