Enterasys D-Series

clear eapol
17-20 Security Configuration
Parameters
Defaults
Ifauth‐modeisnotspecified,allEAPOLsettingswillbecleared.
Ifport‐stringisnotspecified,settingswillbeclearedforallports.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheEAPOLauthenticationmodeforportge.1.3:
D2(su)->clear eapol auth-mode ge.1.3
auth‐mode (Optional)GloballyclearstheEAPOLauthenticationmode.
port‐string Specifiestheport(s)onwhichtoclearEAPOLparameters.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 6‐1.