GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-43
PRELIMINARY
2.) Using the USB communications cable, connect the printer to the Vivid S5/S6 system.
The HP OfficeJet Pro 8000 printer power and communication ports are shown in Figure 3-44.
3.) Boot up the system to the default scanner screen and from the console press
<Alt> + <P> to exit
to the Windows desktop.
4.) Navigate to Printers and Faxes, right-click and select the HP OfficeJet Pro 8000 as the default
printer.
5.) Close the Windows desktop, press Config and then click Connectivity.
Figure 3-44 HP OfficeJet Pro 8000 Printer - Power and Communication Ports
AC Power Outlet
USB Port
Network Port
To Next Page
Loading...
