GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
3-122 Section 3-4 - Preparing for Installation
PRELIMINARY
8.) Follow the steps below to change the IP-Address settings:
a.) From the IP-Address pull-down menu, select <Modify> to display the IPs dialog box.
b.) From the IPs dialog box, select the server you want to modify, then select Modify.
c.) Edit the name and/or the IP address of the server, see Figure 3-146.
Figure 3-143 DICOM Server’s Properties Dialog Box
Figure 3-144 Select <Modify>
Figure 3-145 Select the Unit to Modify
To Next Page
Loading...
