GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-133
PRELIMINARY
7-7-2 Extracting Logs (cont’d)
3.) If use of the Advanced features is required, proceed to the following instructions, as applicable:
• “Enabling Extensive Logging” on page 7-135
• “Advanced Options” on page 7-137
• “DB Scan” on page 7-140
After the required advanced features have been selected, continue with step 4 and step 5, below.
4.) From the Destination drop-down menu, select the required export destination (CD or Memory Stick)
then click Save and Export.
A Zip file (named “logfile_<date>_<time>.zip”) is copied onto the selected removable media.
NOTE: Previously, users were required to save log files before exporting them. With version BT06,
these two operations are performed as one step.
5.) When done, click the Exit button.
The System Problem Reporting dialog closes.
6.) Press <Ctrl>+E to eject the media.
Figure 7-94 System Problem Reporting Dialog
When selecting CD as the export destination, first make sure that the CD has been formatted. For
details, see “Formatting a CD” on page 7-134.
To Next Page
Loading...
