GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
8-66 Section 8-3 - Control Console Components Replacement Procedures
PRELIMINARY
9.) Release the two locking screws that secure the two Joint Assembly supporting pins - Figure 8-81.
10.)Release the ring clips securing the supporting pins - Figure 8-82.
Figure 8-81 Locking Screws Securing the Joint Assembly Supporting Pins
Figure 8-82 Ring Clips Securing Supporting Pins
Locking screws that
secure Joint Assembly Pin
Two Joint Assembly Supporting
Pins (one on either side)
To Next Page
Loading...
