GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
8-110 Section 8-6 - Lower Section Components Replacement Procedures
PRELIMINARY
8-6-1 Opening and Removing the Cabinet Cage Assembly (cont’d)
5.) Release the end of the USB cable from the cable clip, as shown below.
6.) Release the LAN connector from the Back End.
Figure 8-131 Fastening the Cage Door Open
Figure 8-132 Releasing USB Cable from the Cable Clip
Figure 8-133 Releasing the LAN Connector from the Back End
To Next Page
Loading...
