GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-199
PRELIMINARY
6.) Using an Allen key, unscrew each locking screw on either side of the support arm - Figure 8-250.
7.) Tap out the internal supporting pin using a screwdriver - Figure 8-251.
Figure 8-250 Releasing the Securing Screws on Either Side of the Support Arm
Figure 8-251 Tapping out the Lower Support Pin using a Screwdriver
To Next Page
Loading...
