APPENDIX1
────────────────────────────────────────────────────
Appendix 1 Error and Warning Messages
────────────────────────────────────────────────────
16
17
18
19
5
6
7
8
9
10
11
12
13
14
A
APP
Append
ppendix 1 Error and Warning Messages
The unit produces two levels of message to indicate problems. These are
distinguished as follows.
Error messages
(1) The "ERROR" indication appears at the bottom of the screen, followed by the
message. This remains until the cause of the error is removed, or the
STOP
key is pressed.
(2) If the "beep sound" item on the system screen is set to ON, then the beeper
sounds intermittently while the message is displayed.
Warning messages
(1) The "WARNING" indication is displayed on the bottom line of the screen,
followed by the message, but disappears after a few seconds.
(2) Warning messages also disappear if any key is pressed.
(3) If the "beep sound" item on the system screen is set to ON, then the beeper
sounds once only when the message is displayed.
To Next Page
Loading...
