Working with controlled APs
Discovery of controllers by controlled APs
6-17
Action: Indicates the recommended administrative action to be taken to resolve a
diagnostic condition.
Unsynchronized/License
violation
The AP is not synchronized but can continue operation.
However, if synchronized, it will become non-functional as
described above for Synchronized/License violation.
Before synchronizing, either change the configuration to
omit the affected licensed feature or acquire and install a
valid license.
Uploading configuration Configuration settings are currently being sent to the AP.
Uploading firmware The controller is uploading new firmware to the AP. Wait
until the operation completes.
Validating configuration The controller is waiting for the AP to send its
configuration.
Validating firmware The controller is waiting for the AP to send its firmware
version number.
Waiting for acceptance The AP has been authorized by the controller. However,
the AP has not yet selected the controller to function as its
controller. (If multiple controllers replied to the APs
discovery request, the AP may choose to connect with
another controller.)
Wrong product The AP was created with a product type that does not
match the detected product type. This can occur when an
AP is manually added to a group with the wrong product
type.
You should verify and fix the product type.
Validating capabilities The capabilities of the AP are being identified by the
controller.
Diagnostic Description
To Next Page
Loading...
Need help?
General
