5
BRIDGE MODE SETTING SCREEN
5-38
5. [Router] Menu
[Router]–[IP Filter]
M IP Filter (continued)
y Destination IP Address … Enter the destination IP Address (and mask) to filter.
The all packets to the entered IP address are filtered (blocked or passed).
Leave this item blank to filter all packets.
Mask range: 1–32.
u Protocol …………………… Select the transport layer's protocol to filter.
(Default: Any)
Any: Any protocols
TCP: Only TCP
UDP: Only UDP
TCP/UDP: TCP and UDP
(Continued on next page.)
To Next Page
Loading...
