5
BRIDGE MODE SETTING SCREEN
5-53
7. [Bridge Connection] Menu
M Bridge Connection Point (continued)
e Connection IP Address … This item differs, depending on the mode setting.
• When [Unicast] is selected in [IP Communication Mode].
Enter the destination, VE-PG3’s IP address or domain name. (Up to 63 char-
acters)
• When [Multicast] is selected in [IP Communication Mode].
Enter the destination VE-PG3’s Destination IP address.
To operate the VE-PG3 in the Multicast mode, set ALL the VE-PG3s’
Connection IP address to the same one.
• The setting range: "224.0.0.0" to "239.255.255.255"
• When using only one VE-PG3 for the individual Call, group Call or in-house
sound system:
Enter a dummy IP address (to be not used in any situation) when call desti-
nation is other than to a digital transceiver.
Set the port number which is not used for [Connection Port Number:](r).
[Bridge Connection]–[Bridge Connection]
To Next Page
Loading...
