5
BRIDGE MODE SETTING SCREEN
5-81
8. [Port Settings] Menu (continued)
M Digital Transceiver Connection
Mode: NXDN Conventional
Set the details to connect to the UC-FR5000 Network Controller.
q Repeater Address ……… Enter the UC-FR5000's IP address.
w TCP Port Number ……… Enter the Connection Receive Port number which is set in the UC-FR5000.
(Default: 41200)
e UDP Port Number ……… Enter the Data Receive Port number which is set in the UC-FR5000.
(Default: 41220)
r Connect Key ……………… Enter the Key Code which is set in the UC-FR5000.
Unit
t Unit ID …………………… Enter the Unit ID. (Default: 1)
Talkgroup
y Talkgroup ID ……………… Enter the Talkgroup ID. (Default: 1)
[Port Settings]–[Digital Transceiver 1 (D-TRX1)]–
[Digital Transceiver 4 (D-TRX4)]
To Next Page
Loading...
