5
BRIDGE MODE SETTING SCREEN
5-82
8. [Port Settings] Menu
MDigital Transceiver Connection (continued)
Mode: NXDN Conventional
RAN
q RX RAN …………………… Enter the RAN code for receiving. (Default: 1)
w TX RAN …………………… Enter the RAN code for transmitting. (Default: 1)
e Appointment ……………… Enter the check mark when you separately set the TX RAN.
r Encryption ………………… Select "Enable" to encrypt the communication. (Default: Disable)
• When you select "Enable," enter the appropriate key to [ Encryption Key].
Status
t Connection Status ……… Displays the communication status.
<Connection>
Click to connect to the UC-FR5000.
• “Connecting” appears when connected to the UC-FR5000.
<Refresh>
Click to refresh the status.
[Port Settings]–[Digital Transceiver 1 (D-TRX1)]–
[Digital Transceiver 4 (D-TRX4)]
To Next Page
Loading...
