5
BRIDGE MODE SETTING SCREEN
5-85
8. [Port Settings] Menu (continued)
M Digital Transceiver Connection
Mode: dPMR Mode2
Set the details to connect to the UC-FR5000 Network Controller.
q Repeater Address ……… Enter the UC-FR5000's IP address.
w TCP Port Number ……… Enter the Connection Receive Port number which is set in the UC-FR5000.
(Default: 41200)
e UDP Port Number ……… Enter the Data Receive Port number which is set in the UC-FR5000.
(Default: 41220)
r Connect Key ……………… Enter the Key Code which is set in the UC-FR5000. (Default: ucfr5000)
t Packet Encryption ……… Select “Enable” to encrypt the data packet. (Default: Disable)
• When you select "Enable," enter the appropriate key to [Key].
Unit
y Unit ID …………………… Enter the Unit ID which is set in the UC-FR5000. (Default: 1)
RX ID Range
u Talkgroup ID (Start) ……… Enter the Talkgroup Start ID. (Default: 100000)
Talkgroup
i Talkgroup ID ……………… Enter the Talkgroup ID. (Default: 100000)
[Port Settings]–[Digital Transceiver 1 (D-TRX1)]–
[Digital Transceiver 4 (D-TRX4)]
y
u
i
o
!0
!2
!1
!3
To Next Page
Loading...
