:SEARch Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1015
:SEARch:RUNT:POLarity
(see page 1428)
Command Syntax
:SEARch:RUNT:POLarity <slope>
<polarity> ::= {POSitive | NEGative | EITHer}
The :SEARch:RUNT:POLarity command sets the polarity for the runt search.
Query Syntax
:SEARch:RUNT:POLarity?
The :SEARch:RUNT:POLarity? query returns the currently set runt polarity.
Return Format
<slope><NL>
<polarity> ::= {POS | NEG | EITH}
See Also • Chapter 30, “:SEARch Commands,” starting on page 993
• ":SEARch:MODE" on page 997
• ":SEARch:RUNT:SOURce" on page 1017
To Next Page
Loading...
