:FUNCtion<m> Commands 18
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 399
:FUNCtion<m>:BUS:YUNits
(see page 1428)
Command Syntax
:FUNCtion<m>:BUS:YUNits <units>
<m> ::= 1 to (# math functions) in NR1 format
<units> ::= {VOLT | AMPere | NONE}
The :FUNCtion<m>:BUS:YUNits command specifies the vertical units for the Chart
Logic Bus operations.
Query Syntax
:FUNCtion<m>:BUS:YUNits?
The :FUNCtion<m>:BUS:YUNits query returns the Chart Logic Bus vertical units.
Return Format
<units><NL>
<units> ::= {VOLT | AMP | NONE}
See Also • ":FUNCtion<m>:OPERation" on page 416
To Next Page
Loading...
