728 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :SAVE Commands
:SAVE:COMPliance:USB[:STARt]
(see page 1428)
Command Syntax
:SAVE:COMPliance:USB[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:COMPliance:USB[:STARt] command saves USB 2.0 signal quality test
results to a file.
See Also • "Introduction to :SAVE Commands" on page 725
• ":SAVE:FILename" on page 729
• ":SAVE:PWD" on page 739
• Chapter 11, “:COMPliance Commands,” starting on page 325
If a file extension is provided as part of a specified <file_name>, it must be ".html".
To Next Page
Loading...
