Keysight Technologies InfiniiVision MSO-X 4154A

:SEARch Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1087
:SEARch:SERial:USB:MODE
(see page 1428)
Command Syntax
:SEARch:SERial:USB:MODE <mode>
<mode> ::= {TOKen | DATA | HANDshake | SPECial | ALLerrors
| PIDerror | CRC5error | CRC16error | GLITcherror
| STUFFerror | SE1error}
The :SEARch:SERial:USB:MODE command specifies the USB search mode.
Query Syntax
:SEARch:SERial:USB:MODE?
The :SEARch:SERial:USB:MODE? query returns the specified USB search mode.
Return Format
<mode><NL>
<mode> ::= {TOK | DATA | HAND | SPEC | ALL | PID | CRC5
| CRC16 | GLIT | STUFF | SE1}
See Also • ":SEARch:SERial:USB:PID:DATA" on page 1096
• ":SEARch:SERial:USB:PID:HANDshake" on page 1097
• ":SEARch:SERial:USB:PID:SPECial" on page 1098
• ":SEARch:SERial:USB:PID:TOKen" on page 1099