:FUNCtion<m> Commands 18
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 423
:FUNCtion<m>:SMOoth:POINts
(see page 1428)
Command Syntax
:FUNCtion<m>:SMOoth:POINts
<points>
<points> ::= odd integer in NR1 format
When the :FUNCtion<m>:OPERation is SMOoth, the
:FUNCtion<m>:SMOoth:POINts command sets the number of smoothing points to
use.
You can choose an odd number of points, from 3 up to half of the measurement
record or precision analysis record.
Query Syntax
:FUNCtion<m>:SMOoth:POINts?
The :FUNCtion<m>:SMOoth:POINts? query returns the number of smoothing
points specified.
Return Format
<points><NL>
See Also • ":FUNCtion<m>:OPERation" on page 416
To Next Page
Loading...
