:SBUS<n> Commands 29
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 945
:SBUS<n>:SPI:WIDTh
(see page 1428)
Command Syntax
:SBUS<n>:SPI:WIDTh <word_width>
<word_width> ::= integer 4-16 in NR1 format
The :SBUS<n>:SPI:WIDTh command determines the number of bits in a word of
data for SPI.
Query Syntax
:SBUS<n>:SPI:WIDTh?
The :SBUS<n>:SPI:WIDTh? query returns the current SPI decode word width.
Return Format
<word_width><NL>
<word_width> ::= integer 4-16 in NR1 format
Errors • "-241, Hardware missing" on page 1387
See Also • "Introduction to :SBUS<n> Commands" on page 755
• ":SBUS<n>:MODE" on page 759
• ":SBUS<n>:SPI Commands" on page 930
To Next Page
Loading...
