:DISPlay Commands 15
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 363
:DISPlay:ANNotation<n>:BACKground
(see page 1428)
Command Syntax
:DISPlay:ANNotation<n>:BACKground <mode>
<mode> ::= {OPAQue | INVerted | TRANsparent}
<n> ::= an integer from 1 to 10 in NR1 format.
The :DISPlay:ANNotation<n>:BACKground command specifies the background of
the annotation:
• OPAQue — the annotation has a solid background.
• INVerted — the annotation's foreground and background colors are switched.
• TRANsparent — the annotation has a transparent background.
Query Syntax
:DISPlay:ANNotation<n>:BACKground?
The :DISPlay:ANNotation<n>:BACKground? query returns the specified annotation
background mode.
Return Format
<mode><NL>
<mode> ::= {OPAQ | INV | TRAN}
See Also • ":DISPlay:ANNotation<n>" on page 362
• ":DISPlay:ANNotation<n>:TEXT" on page 365
• ":DISPlay:ANNotation<n>:COLor" on page 364
• ":DISPlay:ANNotation<n>:X1Position" on page 366
• ":DISPlay:ANNotation<n>:Y1Position" on page 367
• "Introduction to :DISPlay Commands" on page 360
To Next Page
Loading...
