740 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :SAVE Commands
:SAVE:RESults:[STARt]
(see page 1428)
Command Syntax
:SAVE:RESults:[STARt] [<file_spec>]
<file_name> ::= quoted ASCII string
The :SAVE:RESults:[STARt] command saves analysis results to a
comma-separated values (*.csv) file on a USB storage device.
Use the :SAVE:RESults:FORMat commands to specify the analysis types whose
results are saved to the file.
When multiple types of analysis results are selected, they are all saved to the same
file and separated by a blank line.
See Also • ":SAVE:RESults:FORMat:CURSor" on page 741
• ":SAVE:RESults:FORMat:MASK" on page 742
• ":SAVE:RESults:FORMat:MEASurement" on page 743
• ":SAVE:RESults:FORMat:SEARch" on page 744
• ":SAVE:RESults:FORMat:SEGMented" on page 745
To Next Page
Loading...
