To Next Page

To Previous Page

1050 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide

31 :SBUS<n> Commands

:SBUS<n>:SENT:SIGNal<s>:DISPlay

(see page 1610)

Command Syntax

:SBUS<n>:SENT:SIGNal<s>:DISPlay {{0 | OFF} | {1 | ON}}

<s> ::= 1-6, in NR1 format.

The :SBUS<n>:SENT:SIGNal<s>:DISPlay command specifies whether the given

signal is on or off.

Query Syntax

:SBUS<n>:SENT:SIGNal<s>:DISPlay?

The :SBUS<n>:SENT:SIGNal<s>:DISPlay? query returns the signal on/off setting.

Return Format

<setting> ::= {0 | 1}

See Also • ":SBUS<n>:SENT:CLOCk" on page 1040

• ":SBUS<n>:SENT:CRC" on page 1041

• ":SBUS<n>:SENT:DISPlay" on page 1042

• ":SBUS<n>:SENT:FORMat" on page 1044

• ":SBUS<n>:SENT:IDLE" on page 1046

• ":SBUS<n>:SENT:LENGth" on page 1047

• ":SBUS<n>:SENT:PPULse" on page 1048

• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 1051

• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 1053

• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 1055

• ":SBUS<n>:SENT:SIGNal<s>:ORDer" on page 1057

• ":SBUS<n>:SENT:SIGNal<s>:STARt" on page 1059

• ":SBUS<n>:SENT:SOURce" on page 1061

• ":SBUS<n>:SENT:TOLerance" on page 1063

• ":SBUS<n>:SENT:TRIGger" on page 1064

• ":SBUS<n>:SENT:TRIGger:FAST:DATA" on page 1066

• ":SBUS<n>:SENT:TRIGger:SLOW:DATA" on page 1067

• ":SBUS<n>:SENT:TRIGger:SLOW:ID" on page 1069

• ":SBUS<n>:SENT:TRIGger:SLOW:ILENgth" on page 1071

• ":SBUS<n>:SENT:TRIGger:TOLerance" on page 1072

Keysight Technologies InfiniiVision MSO-X 4154A User Manual

Questions and Answers: