592 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
24 :MTESt Commands
:MTESt:COUNt:TIME
(see page 1428)
Query Syntax
:MTESt:COUNt:TIME?
The :MTESt:COUNt:TIME? query returns the elapsed time in the current mask test
run.
Return Format
<time><NL>
<time> ::= elapsed seconds in NR3 format.
See Also • "Introduction to :MTESt Commands" on page 581
• ":MTESt:COUNt:WAVeforms" on page 593
• ":MTESt:COUNt:FWAVeforms" on page 590
• ":MTESt:COUNt:RESet" on page 591
Example Code • "Example Code" on page 581