752 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :SAVE Commands
:SAVE:WMEMory:SOURce
(see page 1428)
Command Syntax
:SAVE:WMEMory:SOURce <source>
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :SAVE:WMEMory:SOURce command selects the source to be saved as a
reference waveform file.
Query Syntax
:SAVE:WMEMory:SOURce?
The :SAVE:WMEMory:SOURce? query returns the source to be saved as a
reference waveform file.
Return Format
<source><NL>
<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}
See Also • "Introduction to :SAVE Commands" on page 725
• ":SAVE:WMEMory[:STARt]" on page 753
• ":RECall:WMEMory<r>[:STARt]" on page 722
Only ADD or SUBtract math operations can be saved as reference waveforms.
MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or MATH.
To Next Page
Loading...
