376 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
15 :DISPlay Commands
:DISPlay:VECTors
(see page 1428)
Command Syntax
:DISPlay:VECTors <vectors>
<vectors> ::= {{1 | ON} | {0 | OFF}}
The :DISPlay:VECTors command turns vector display on or off.
When vectors are turned on, the oscilloscope displays lines connecting sampled
data points.
On the 1 GHz and 1.5 GHz bandwidth models, you can turn off vectors to view just
waveform data points.
Query Syntax
:DISPlay:VECTors?
The :DISPlay:VECTors? query returns the vectors setting.
Return Format
<vectors><NL>
<vectors> ::= {1 | 0}
See Also • "Introduction to :DISPlay Commands" on page 360
To Next Page
Loading...
