1242 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
34 :WAVeform Commands
:WAVeform:COUNt
(see page 1428)
Query Syntax
:WAVeform:COUNt?
The :WAVeform:COUNT? query returns the count used to acquire the current
waveform. This may differ from current values if the unit has been stopped and its
configuration modified. For all acquisition types except average, this value is 1.
Return Format
<count_argument><NL>
<count_argument> ::= an integer from 1 to 65536 in NR1 format
See Also • "Introduction to :WAVeform Commands" on page 1235
• ":ACQuire:COUNt" on page 266
• ":ACQuire:TYPE" on page 276
To Next Page
Loading...
