:SBUS<n> Commands 29
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 765
:SBUS<n>:A429:COUNt:RESet
(see page 1428)
Command Syntax
:SBUS<n>:A429:COUNt:RESet
Resets the word and error counters.
Errors • "-241, Hardware missing" on page 1387
See Also • ":SBUS<n>:A429:COUNt:WORD" on page 766
• ":SBUS<n>:A429:COUNt:ERRor" on page 764
• "Introduction to :SBUS<n> Commands" on page 755
• ":SBUS<n>:MODE" on page 759
• ":SBUS<n>:A429 Commands" on page 760
To Next Page
Loading...
