Keysight Technologies InfiniiVision MSO-X 4154A

263
Keysight InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
7 :ACQuire Commands
Set the parameters for acquiring and storing data. See "Introduction to :ACQuire
Commands" on page 264.
Table 90 :ACQuire Commands Summary
Command Query Options and Query Returns
:ACQuire:COMPlete
<complete> (see
page 265)
:ACQuire:COMPlete?
(see page 265)
<complete> ::= 100; an integer in
NR1 format
:ACQuire:COUNt
<count> (see page 266)
:ACQuire:COUNt? (see
page 266)
<count> ::= an integer from 2 to
65536 in NR1 format
:ACQuire:MODE <mode>
(see page 267)
:ACQuire:MODE? (see
page 267)
<mode> ::= {RTIMe | ETIMe |
SEGMented}
n/a :ACQuire:POINts? (see
page 268)
<# points> ::= an integer in NR1
format
:ACQuire:RSIGnal
<ref_signal_mode>
(see page 269)
:ACQuire:RSIGnal?
(see page 269)
<ref_signal_mode> ::= {OFF | OUT
| IN}
:ACQuire:SEGMented:AN
ALyze (see page 270)
n/a n/a (with Option SGM)
:ACQuire:SEGMented:CO
UNt <count> (see
page 271)
:ACQuire:SEGMented:CO
UNt? (see page 271)
<count> ::= an integer from 2 to
1000 in NR1 format (with Option
SGM)
:ACQuire:SEGMented:IN
Dex <index> (see
page 272)
:ACQuire:SEGMented:IN
Dex? (see page 272)
<index> ::= an integer from 1 to
1000 in NR1 format (with Option
SGM)
n/a :ACQuire:SRATe? (see
page 275)
<sample_rate> ::= sample rate
(samples/s) in NR3 format
:ACQuire:TYPE <type>
(see page 276)
:ACQuire:TYPE? (see
page 276)
<type> ::= {NORMal | AVERage |
HRESolution | PEAK}