Keysight Technologies InfiniiVision MSO-X 4154A

:SBUS<n> Commands 29
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 977
:SBUS<n>:USB:TRIGger:ADDRess
(see page 1428)
Command Syntax
:SBUS<n>:USB:TRIGger:ADDRess <string>
<string> ::= "nnnnnnn" where n ::= {0|1|X}
<string> ::= "0xnn" where n ::= {0,..,9 | A,..,F | X | $}
The :SBUS<n>:USB:TRIGger:ADDRess command specifies the 7-bit Address
portion of the trigger for the selected bus, in binary or hex.
Query Syntax
:SBUS<n>:USB:TRIGger:ADDRess?
The :SBUS<n>:USB:TRIGger:ADDRess? query returns the specified Address
portion of the trigger.
Return Format
<string><NL>
<string> ::= "nnnnnnn" where n ::= {0|1|X}
See Also • ":SBUS<n>:USB:TRIGger:PID:SPECial" on page 988
• ":SBUS<n>:USB:TRIGger:PID:TOKen" on page 989