Keysight Technologies InfiniiVision MSO-X 4154A

440 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
19 :HARDcopy Commands
:HARDcopy:NETWork:PASSword
(see page 1428)
Command Syntax
:HARDcopy:NETWork:PASSword <password>
<password> ::= quoted ASCII string
The :HARDcopy:NETWork:PASSword command sets the password for the
specified Windows network domain and user name.
The password setting is a common setting for both network printer slots.
See Also • "Introduction to :HARDcopy Commands" on page 430
• ":HARDcopy:NETWork:USERname" on page 442
• ":HARDcopy:NETWork:DOMain" on page 439
• ":HARDcopy:NETWork:SLOT" on page 441
• ":HARDcopy:NETWork:APPLy" on page 438
• ":HARDcopy:NETWork:ADDRess" on page 437