:WGEN<w> Commands 35
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1277
:WGEN<w>:ARBitrary:DATA:CLEar
(see page 1428)
Command Syntax
:WGEN<w>:ARBitrary:DATA:CLEar
<w> ::= 1 or 2 in NR1 format
The :WGEN<w>:ARBitrary:DATA:CLEar command clears the arbitrary waveform
memory and loads it with the default waveform.
See Also • ":WGEN<w>:ARBitrary:DATA" on page 1275
• ":WGEN<w>:ARBitrary:DATA:DAC" on page 1278
• ":SAVE:ARBitrary[:STARt]" on page 727
• ":RECall:ARBitrary[:STARt]" on page 715
To Next Page
Loading...
