434 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
18 :EXTernal Trigger Commands
:EXTernal:BWLimit
(see page 1610)
Command Syntax
:EXTernal:BWLimit <bwlimit>
<bwlimit> ::= {0 | OFF}
The :EXTernal:BWLimit command is provided for product compatibility. The only
legal value is 0 or OFF. Use the :TRIGger:HFReject command to limit bandwidth
on the external trigger input.
Query Syntax
:EXTernal:BWLimit?
The :EXTernal:BWLimit? query returns the current setting of the low-pass filter
(always 0).
Return Format
<bwlimit><NL>
<bwlimit> ::= 0
See Also • "Introduction to :EXTernal Trigger Commands" on page 433
• "Introduction to :TRIGger Commands" on page 1295
• ":TRIGger:HFReject" on page 1300
To Next Page
Loading...
Need help?
General
