Keysight Technologies InfiniiVision MSO-X 4154A

Root (:) Commands 6
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 255
:PRINt
(see page 1428)
Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | PRINter1 | BMP8bit
| BMP | PNG | NOFactors | FACTors}
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently selected
format (device). If an option is not specified, the value selected in the Print Config
menu is used.
See Also • "Introduction to Root (:) Commands" on page 226
• "Introduction to :HARDcopy Commands" on page 430
• ":HARDcopy:FACTors" on page 433
• ":HARDcopy:GRAYscale" on page 1351
• ":DISPlay:DATA" on page 369