Keysight Technologies InfiniiVision MSO-X 4154A

810 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:CXPI:PARity
(see page 1428)
Command Syntax
:SBUS<n>:CXPI:PARity {{0 | OFF} | {1 | ON}}
The :SBUS<n>:CXPI:PARity command specifies whether the parity bit should be
displayed in the identifier field.
When OFF, the upper bit is masked. The parity is still checked, but it is not
displayed unless a parity error occurs.
Query Syntax
:SBUS<n>:CXPI:PARity?
The :SBUS<n>:CXPI:PARity? query returns the parity display setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":SBUS<n>:CXPI:BAUDrate" on page 809
• ":SBUS<n>:CXPI:SOURce" on page 811
• ":SBUS<n>:CXPI:TOLerance" on page 812
• ":SBUS<n>:CXPI:TRIGger" on page 813