Keysight Technologies InfiniiVision MSO-X 4154A

:SBUS<n> Commands 29
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 971
:SBUS<n>:USB:BASE
(see page 1428)
Command Syntax
:SBUS<n>:USB:BASE <base>
<base> ::= {ASCii | BINary | DECimal | HEX}
The :SBUS<n>:USB:BASE command determines the base to use for the USB
decode and Lister display, controlling how the data or payload field is displayed.
All other fields are displayed in hex
Query Syntax
:SBUS<n>:USB:BASE?
The :SBUS<n>:USB:BASE? query returns the currently specified base.
Return Format
<base><NL>
<base> ::= {ASC | BIN | DEC | HEX}