:FUNCtion<m> Commands 18
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 401
:FUNCtion<m>:DISPlay
(see page 1428)
Command Syntax
:FUNCtion<m>:DISPlay <display>
<m> ::= 1 to (# math functions) in NR1 format
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion<m>:DISPlay command turns the display of the function on or off.
When ON is selected, the function performs as specified using the other FUNCtion
commands. When OFF is selected, function is neither calculated nor displayed.
Query Syntax
:FUNCtion<m>:DISPlay?
The :FUNCtion<m>:DISPlay? query returns whether the function display is on or
off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also • "Introduction to :FUNCtion<m> Commands" on page 393
• ":VIEW" on page 262
• ":BLANk" on page 234
• ":STATus" on page 259
To Next Page
Loading...
