Keysight Technologies InfiniiVision MSO-X 4154A

:MTESt Commands 24
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 591
:MTESt:COUNt:RESet
(see page 1428)
Command Syntax
:MTESt:COUNt:RESet
The :MTESt:COUNt:RESet command resets the mask statistics.
See Also • "Introduction to :MTESt Commands" on page 581
• ":MTESt:COUNt:WAVeforms" on page 593
• ":MTESt:COUNt:FWAVeforms" on page 590
• ":MTESt:COUNt:TIME" on page 592