:SEARch Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1043
:SEARch:SERial:FLEXray:DATA:LENGth
(see page 1428)
Command Syntax
:SEARch:SERial:FLEXray:DATA:LENGth <length>
<length> ::= integer from 1 to 12 in NR1 format
The :SEARch:SERial:FLEXray:DATA:LENGth command specifies the length of data
values when searching for FlexRay frames.
The data value is specified using the :SEARch:SERial:FLEXray:DATA command.
Query Syntax
:SEARch:SERial:FLEXray:DATA:LENGth?
The :SEARch:SERial:FLEXray:DATA:LENGth? query returns the current data length
setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 12 in NR1 format
See Also • Chapter 30, “:SEARch Commands,” starting on page 993
• ":SEARch:SERial:FLEXray:MODE" on page 1045
• ":SEARch:SERial:FLEXray:DATA" on page 1042
To Next Page
Loading...
