Keysight Technologies InfiniiVision MSO-X 4154A

660 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:MODulation:TYPE
(see page 1428)
Command Syntax
:POWer:MODulation:TYPE <modulation>
<modulation> ::= {VAVerage | ACRMs | VRATio | PERiod | FREQuency
| PWIDith | NWIDth | DUTYcycle | RISetime | FALLtime}
The :POWer:MODulation:TYPE command selects the type of measurement to
make in the modulation analysis:
•VAVerage
•ACRMs
•VRATio
•PERiod
•FREQuency
• PWIDth (positive pulse width)
• NWIDth (negative pulse width)
•DUTYcycle
•RISetime
•FALLtime
Query Syntax
:POWer:MODulation:TYPE?
The :POWer:MODulation:TYPE query returns the modulation type setting.
Return Format
<modulation><NL>
<modulation> ::= {VAV | ACRM | VRAT | PER | FREQ | PWID | NWID | DUTY
| RIS | FALL}
See Also • ":POWer:MODulation:SOURce" on page 659
• ":POWer:MODulation:APPLy" on page 658
• ":MEASure:VAVerage" on page 542
• ":MEASure:VRMS" on page 548
• ":MEASure:VRATio" on page 547
• ":MEASure:PERiod" on page 518
• ":MEASure:FREQuency" on page 510
• ":MEASure:PWIDth" on page 522
• ":MEASure:NWIDth" on page 514
• ":MEASure:DUTYcycle" on page 508
• ":MEASure:RISetime" on page 526
• ":MEASure:FALLtime" on page 509