Keysight Technologies InfiniiVision MSO-X 4154A

644 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:HARMonics:DISPlay
(see page 1428)
Command Syntax
:POWer:HARMonics:DISPlay <display>
<display> ::= {TABLe | BAR | OFF}
The :POWer:HARMonics:DISPlay command specifies how to display the current
harmonics analysis results:
•TABLe
•BAR — Bar chart.
• OFF — Harmonics measurement results are not displayed.
Query Syntax
:POWer:HARMonics:DISPlay?
The :POWer:HARMonics:DISPlay query returns the display setting.
Return Format
<display><NL>
<display> ::= {TABL | BAR | OFF}
See Also • ":POWer:HARMonics:APPLy" on page 642
• ":POWer:HARMonics:DATA" on page 643
• ":POWer:HARMonics:FAILcount" on page 645
• ":POWer:HARMonics:LINE" on page 646
• ":POWer:HARMonics:POWerfactor" on page 647
• ":POWer:HARMonics:RUNCount" on page 650
• ":POWer:HARMonics:STANdard" on page 651
• ":POWer:HARMonics:STATus" on page 652
• ":POWer:HARMonics:THD" on page 653