Keysight Technologies InfiniiVision MSO-X 4154A

782 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:CAN:COUNt:RESet
(see page 1428)
Command Syntax
:SBUS<n>:CAN:COUNt:RESet
Resets the frame counters.
Errors • "-241, Hardware missing" on page 1387
See Also • ":SBUS<n>:CAN:COUNt:ERRor" on page 780
• ":SBUS<n>:CAN:COUNt:OVERload" on page 781
• ":SBUS<n>:CAN:COUNt:TOTal" on page 784
• ":SBUS<n>:CAN:COUNt:UTILization" on page 785
• "Introduction to :SBUS<n> Commands" on page 755
• ":SBUS<n>:MODE" on page 759
• ":SBUS<n>:CAN Commands" on page 777