Keysight Technologies InfiniiVision MSO-X 4154A

:POWer Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 673
:POWer:PSRR:PPDecade
(see page 1428)
Command Syntax
:POWer:PSRR:PPDecade <pts>
<pts> ::= {10 | 20 | 30 | 40 | 50}
The :POWer:PSRR:PPDecade command selects the number of frequency test
points per decade (in the log scale).
Query Syntax
:POWer:CLResponse:PPDecade?
The :POWer:PSRR:PPDecade? query returns the points per decade setting.
Return Format
<pts><NL>
<pts> ::= {10 | 20 | 30 | 40 | 50}
See Also • ":POWer:PSRR" on page 667
• ":POWer:PSRR:APPLy" on page 668
• ":POWer:PSRR:DATA" on page 669
• ":POWer:PSRR:FREQuency:MAXimum" on page 670
• ":POWer:PSRR:FREQuency:MINimum" on page 671
• ":POWer:PSRR:FREQuency:MODE" on page 672
• ":POWer:PSRR:SOURce:INPut" on page 674
• ":POWer:PSRR:SOURce:OUTPut" on page 675
• ":POWer:PSRR:WGEN:LOAD" on page 676
• ":POWer:PSRR:WGEN:VOLTage" on page 677
• ":POWer:PSRR:WGEN:VOLTage:PROFile" on page 678