:POWer Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 647
:POWer:HARMonics:POWerfactor
(see page 1428)
Query Syntax
:POWer:HARMonics:POWerfactor?
The :POWer:HARMonics:POWerfactor query returns the power factor for IEC
61000-3-2 Standard Class C power factor value.
Return Format
<value> ::= Class C power factor in NR3 format
See Also • ":POWer:HARMonics:APPLy" on page 642
• ":POWer:HARMonics:DATA" on page 643
• ":POWer:HARMonics:DISPlay" on page 644
• ":POWer:HARMonics:FAILcount" on page 645
• ":POWer:HARMonics:LINE" on page 646
• ":POWer:HARMonics:RUNCount" on page 650
• ":POWer:HARMonics:STANdard" on page 651
• ":POWer:HARMonics:STATus" on page 652
• ":POWer:HARMonics:THD" on page 653
To Next Page
Loading...
