What's New 1
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 53
Version 3.00 at Introduction
The Keysight InfiniiVision 4000 X-Series oscilloscopes were introduced with
version 3.00 of oscilloscope operating software.
The command set is most closely related to the InfiniiVision 3000 X-Series
oscilloscopes (and the 7000A/B Series, 6000 Series, and 54620/54640 Series
oscilloscopes before them). For more information, see “Command Differences
From 3000 X-Series Oscilloscopes" on page 54.
To Next Page
Loading...
