:SBUS<n> Commands 29
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 887
:SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe
(see page 1428)
Command Syntax
:SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe <name>
<name> ::= quoted ASCII string
The :SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe command specifies the message to
trigger on when LIN symbolic data has been loaded (recalled) into the oscilloscope
and the LIN trigger mode is set to FRAMe or FSIGnal.
Query Syntax
:SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe?
The :SBUS<n>:LIN:TRIGger:SYMBolic:FRAMe? query returns the specified
message.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also • ":RECall:LDF[:STARt]" on page 718
• ":SBUS<n>:LIN:TRIGger" on page 881
• ":SBUS<n>:LIN:TRIGger:SYMBolic:SIGNal" on page 888
• ":SBUS<n>:LIN:TRIGger:SYMBolic:VALue" on page 889
To Next Page
Loading...
