Keysight Technologies InfiniiVision MSO-X 4154A

:HARDcopy Commands 19
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 443
:HARDcopy:PALette
(see page 1428)
Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser printers, so
the COLor option is not available when connected to laser printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also • "Introduction to :HARDcopy Commands" on page 430
• ":HARDcopy:STARt" on page 445
• ":HARDcopy:FACTors" on page 433
• ":HARDcopy:LAYout" on page 436
• ":HARDcopy:FFEed" on page 434
• ":HARDcopy:INKSaver" on page 435