1066 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:SERial:LIN:SYMBolic:SIGNal
(see page 1428)
Command Syntax
:SEARch:SERial:LIN:SYMBolic:SIGNal <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:LIN:SYMBolic:SIGNal command specifies the signal to search
for when LIN symbolic data has been loaded (recalled) into the oscilloscope and
the LIN serial search mode is set to FSIGnal.
Query Syntax
:SEARch:SERial:LIN:SYMBolic:SIGNal?
The :SEARch:SERial:LIN:SYMBolic:SIGNal? query returns the specified signal.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also • ":RECall:LDF[:STARt]" on page 718
• ":SEARch:SERial:LIN:MODE" on page 1061
• ":SEARch:SERial:LIN:SYMBolic:FRAMe" on page 1065
• ":SEARch:SERial:LIN:SYMBolic:VALue" on page 1067
To Next Page
Loading...
